Low post count pass around.
- ChefKnivesToGo
- Site Admin
- Posts: 16857
- Joined: Tue Jan 24, 2017 2:23 pm
- Location: Madison, WI
- Has thanked: 2051 times
- Been thanked: 3275 times
- Contact:
Low post count pass around.
I thought it might be fun to offer a passaround to those that get left out all the time. How about I do a konosuke white #2 gyuto (240mm) for 5 guys with under 100 posts? I'll personally sharpen it so you can see my work.
If we get more than 5 guys I'll choose based on your order history with me.
If we get more than 5 guys I'll choose based on your order history with me.
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
Re: Low post count pass around.
Sounds fair. I have never done a pass around yet. I always seem to check after the rotation has already been decided
Re: Low post count pass around.
I think I might be under 100 posts and would really like that. Plus, shipping to me is cheap or I could drive down on a weekend and pick it up, LOL! Count me in if I qualify!
Re: Low post count pass around.
I own a Kono W2. Profile was exactly like my HD2. The W2 was perhaps 1/10 of ounce lighter and the tip seemed slightly thinner, though they are both lasers.
After comparing I decided to sell my HD2. I liked the blond handle on the W2 better, the price was great and the W2 sharpens easier. HD has the edge on retention. Both great knives. I use the W2 as a slicer and for fine boardwork.
After comparing I decided to sell my HD2. I liked the blond handle on the W2 better, the price was great and the W2 sharpens easier. HD has the edge on retention. Both great knives. I use the W2 as a slicer and for fine boardwork.
Jeffry B
- ChefKnivesToGo
- Site Admin
- Posts: 16857
- Joined: Tue Jan 24, 2017 2:23 pm
- Location: Madison, WI
- Has thanked: 2051 times
- Been thanked: 3275 times
- Contact:
Re: Low post count pass around.
Hi David,
Absolutely. I'll be happy to add you to the list.
You're #3.
- ChefKnivesToGo
- Site Admin
- Posts: 16857
- Joined: Tue Jan 24, 2017 2:23 pm
- Location: Madison, WI
- Has thanked: 2051 times
- Been thanked: 3275 times
- Contact:
Re: Low post count pass around.
Hi Donald,
Absolutely. You were just the type of member I was thinking of when I came up with this.
You're #2
- ChefKnivesToGo
- Site Admin
- Posts: 16857
- Joined: Tue Jan 24, 2017 2:23 pm
- Location: Madison, WI
- Has thanked: 2051 times
- Been thanked: 3275 times
- Contact:
Re: Low post count pass around.
Spencer, since you've had some bad luck getting in on pass arounds I'll put you in on this one.Chefspence wrote: ↑Fri Apr 21, 2017 8:49 am Sounds fair. I have never done a pass around yet. I always seem to check after the rotation has already been decided
You're 1 on the list.
-
- Posts: 70
- Joined: Tue Feb 07, 2017 10:43 am
- ChefKnivesToGo
- Site Admin
- Posts: 16857
- Joined: Tue Jan 24, 2017 2:23 pm
- Location: Madison, WI
- Has thanked: 2051 times
- Been thanked: 3275 times
- Contact:
Re: Low post count pass around.
Hi Chris,
Yes you've placed multiple orders with us so I'll be happy to add you to the list. You're #4.
Re: Low post count pass around.
Thanks Mark! As always I'll shamelessly plug CKTG on the Care Free Cooks Forum. I know there are more coming your way again, I've been asked for a lot of recommendations. Someday we'll have to come up with a way to count then so I know they're taking my advice, LOL! Thanks again for putting me on the list, looking forward to it!ChefKnivesToGo wrote: ↑Fri Apr 21, 2017 10:08 amHi Donald,
Absolutely. You were just the type of member I was thinking of when I came up with this.
You're #2
-
- Posts: 328
- Joined: Fri Jan 27, 2017 10:47 pm
- Has thanked: 1 time
- Been thanked: 37 times
-
- Posts: 70
- Joined: Tue Feb 07, 2017 10:43 am
Re: Low post count pass around.
Thanks Mark, excited to try out a one of the legendary Kono lasers.ChefKnivesToGo wrote: ↑Fri Apr 21, 2017 10:18 amHi Chris,
Yes you've placed multiple orders with us so I'll be happy to add you to the list. You're #4.
- ChefKnivesToGo
- Site Admin
- Posts: 16857
- Joined: Tue Jan 24, 2017 2:23 pm
- Location: Madison, WI
- Has thanked: 2051 times
- Been thanked: 3275 times
- Contact:
Re: Low post count pass around.
Hi Mike,gastro gnome wrote: ↑Fri Apr 21, 2017 10:48 am If there is a spot still available, I'd be excited to join in.
Yes you've had a number of orders with us too. We have a midwest vibe going here so we should have fast shipping between guys.
You're #5.
I'll figure out the logical order and get this one going. I'm going to send it to Steve for a review first. Once you get it please feel free to use it, sharpen it etc. I also would like you to give a short review on the item page and please come back to this thread and tell us what you think. Since you're all new to the pass arounds I don't care if you like it or not, just give us your opinion and have fun with it. Like I said I'll finish sharpen this one so be mindful that it's not the factory edge when the first of you receive it. These blades are ground identically to the HD2s and the Swedish Stainless ones so you'll have some reference points to those knives.
-
- Posts: 10
- Joined: Mon Feb 13, 2017 11:20 am
Re: Low post count pass around.
If somebody drops out, I would love to be a part of the pass around.