Kurosaki laser 210
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
Kurosaki laser 210
Ok let's get this around. What a great knife I haven't used it in a pro environment but think it's well suited.
Requirements;
100 post min
Use it and review it; on this post and product page at least. You can also put it in the product review area
Use it, sharpen it, have fun
Above all, treat it like it's your own!!
If you happen to chip it, tip it, or something worse, be prepar d to fix it or pay for its fixes. It's tough to think someone's gong to use who doesn't have to care about it, but care for it please.
One week of use.
Limit of five
I like this knife a lot.
Besides that, I think it's mostly some common sense points of etiquette...
~ Be wary of rust formation,,.. wipe and dry often.
~ Leaving a patina is nice but if you get the beginnings of rust, by all means clean it off.
~ Use the knife as if it were your own. You shouldn't need to baby it too much, but certainly don't push it to/past it's limits.
~ Apply a light bit of tsubaki (or similar) oil to the blade during shipping.
~ Pass it on in a timely manner
~ Insure the knife for it's value during shipping.
..I'm not sure it this is a requirement but I've always paid the extra for a required signature upon delivery during shipping. (communicating w/ the recipient before you ship it is a good idea here, to make sure they can receive it, etc..)
There's a couple people in already, so act quick...
Requirements;
100 post min
Use it and review it; on this post and product page at least. You can also put it in the product review area
Use it, sharpen it, have fun
Above all, treat it like it's your own!!
If you happen to chip it, tip it, or something worse, be prepar d to fix it or pay for its fixes. It's tough to think someone's gong to use who doesn't have to care about it, but care for it please.
One week of use.
Limit of five
I like this knife a lot.
Besides that, I think it's mostly some common sense points of etiquette...
~ Be wary of rust formation,,.. wipe and dry often.
~ Leaving a patina is nice but if you get the beginnings of rust, by all means clean it off.
~ Use the knife as if it were your own. You shouldn't need to baby it too much, but certainly don't push it to/past it's limits.
~ Apply a light bit of tsubaki (or similar) oil to the blade during shipping.
~ Pass it on in a timely manner
~ Insure the knife for it's value during shipping.
..I'm not sure it this is a requirement but I've always paid the extra for a required signature upon delivery during shipping. (communicating w/ the recipient before you ship it is a good idea here, to make sure they can receive it, etc..)
There's a couple people in already, so act quick...
- sharksfan7
- Posts: 443
- Joined: Thu Jan 26, 2017 10:53 pm
- Location: San Diego, CA
- Has thanked: 16 times
- Been thanked: 5 times
Re: Kurosaki laser 210
Would love to be included, Spence. Hoping to get a 240 once they're available again. This would be my first pass around to participate in. Thanks for offering this up.
--Tony
- pd7077
- Posts: 1045
- Joined: Thu Feb 02, 2017 7:02 pm
- Location: Bay Area, CA
- Has thanked: 66 times
- Been thanked: 106 times
Re: Kurosaki laser 210
I would like to be a part of this passaround if possible. This would be my first as well. Never used a laser before so this would be a great experience. Thanks for your generosity Spence!
--- Steve
-
- Posts: 2822
- Joined: Thu Jan 26, 2017 11:55 pm
- Location: Minnesota
- Has thanked: 6 times
- Been thanked: 68 times
Re: Kurosaki laser 210
This line is amazing. Pd it's not a "true" laser but it certainly acts like one.
- pd7077
- Posts: 1045
- Joined: Thu Feb 02, 2017 7:02 pm
- Location: Bay Area, CA
- Has thanked: 66 times
- Been thanked: 106 times
Re: Kurosaki laser 210
Thanks, I never realized that. Just took a look at the product page, and the choil shot def doesn't look laserish. Still very interested though as I've been considering picking up a Kurosaki.Nmiller21k wrote: ↑Fri Jul 28, 2017 6:46 am This line is amazing. Pd it's not a "true" laser but it certainly acts like one.
--- Steve
-
- Posts: 2822
- Joined: Thu Jan 26, 2017 11:55 pm
- Location: Minnesota
- Has thanked: 6 times
- Been thanked: 68 times
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
Re: Kurosaki laser 210
Well I've had the most interest in this one, sorry to say not everyone can be included. I don't want this to be gone that long.
So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett
I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me . I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.
So this knife is no longer open to anymore peeps. Thanks guys.
So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett
I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me . I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.
So this knife is no longer open to anymore peeps. Thanks guys.
- sharksfan7
- Posts: 443
- Joined: Thu Jan 26, 2017 10:53 pm
- Location: San Diego, CA
- Has thanked: 16 times
- Been thanked: 5 times
Re: Kurosaki laser 210
I'm down in SoCal, Spence. But it looks like Pd7077 is in the Bay Area as well, so perhaps he can step in as bounty hunter.Chefspence wrote: ↑Fri Aug 04, 2017 6:50 pm Well I've had the most interest in this one, sorry to say not everyone can be included. I don't want this to be gone that long.
So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett
I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me . I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.
So this knife is no longer open to anymore peeps. Thanks guys.
--Tony
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
Re: Kurosaki laser 210
Ok Pd, you're dog the bounty hunter on that this one. To all, send me your shipping info so I can figure a rotation. This one has been used very lightly, I don't think it needs a sharpening at all to start, but if you want, strop it up.
- pd7077
- Posts: 1045
- Joined: Thu Feb 02, 2017 7:02 pm
- Location: Bay Area, CA
- Has thanked: 66 times
- Been thanked: 106 times
Re: Kurosaki laser 210
Yup, I'm in the Bay Area so I'll do what's neededsharksfan7 wrote: ↑Fri Aug 04, 2017 7:54 pmI'm down in SoCal, Spence. But it looks like Pd7077 is in the Bay Area as well, so perhaps he can step in as bounty hunter.Chefspence wrote: ↑Fri Aug 04, 2017 6:50 pm Well I've had the most interest in this one, sorry to say not everyone can be included. I don't want this to be gone that long.
So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett
I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me . I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.
So this knife is no longer open to anymore peeps. Thanks guys.
--- Steve
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
Re: Kurosaki laser 210
Ok fine Thank jmcnelly for sending me a knife to play with while all these are away.
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
- sharksfan7
- Posts: 443
- Joined: Thu Jan 26, 2017 10:53 pm
- Location: San Diego, CA
- Has thanked: 16 times
- Been thanked: 5 times
Re: Kurosaki laser 210
Hey Spence. Are we going in the order you listed earlier? I need to make sure I'm around when my turn pops up. I'm not really going to have much time next week, 8/28-9/1, so I wouldn't mind waiting until after the Bay Area guys have a go. Thanks.
--Tony
-
- Posts: 2504
- Joined: Thu Jan 26, 2017 11:03 pm
- Has thanked: 2 times
- Been thanked: 32 times
Re: Kurosaki laser 210
No, sorry I'm making the list as we speak. It's going east coast first so you've got timesharksfan7 wrote: ↑Mon Aug 21, 2017 5:44 pm Hey Spence. Are we going in the order you listed earlier? I need to make sure I'm around when my turn pops up. I'm not really going to have much time next week, 8/28-9/1, so I wouldn't mind waiting until after the Bay Area guys have a go. Thanks.
- sharksfan7
- Posts: 443
- Joined: Thu Jan 26, 2017 10:53 pm
- Location: San Diego, CA
- Has thanked: 16 times
- Been thanked: 5 times
Re: Kurosaki laser 210
Cool. Thanks.Chefspence wrote: ↑Mon Aug 21, 2017 5:46 pm
No, sorry I'm making the list as we speak. It's going east coast first so you've got time
--Tony