CCK long slicer with custom handle - SOLD!

This is a free service where you can buy and sell knives and sharpening equipment and kitchen tools. There is no fee for posting items but we require that you've made at least 30 posts on our forum before you post something for sale.
Forum rules
As stated in the description, we want to get to know you better before allowing new forum members to post items for sale. You will not be able to create topics until you reach a 30 post minimum. Please take your time and contribute to the forum discussions in a substantive way. SPAM posting to reach 30 posts is considered very bad form and could get you booted off these forums.

NOTE: If you have an item for sale and you are located outside the Continental U.S. please state your location so the buyer knows what to expect in a purchase transaction.
Post Reply
Mike9
Posts: 232
Joined: Fri Jan 27, 2017 9:31 am

CCK long slicer with custom handle - SOLD!

Post by Mike9 » Fri Oct 13, 2017 6:34 pm

I'm parting with this wonderful stainless slicer from CCK. The number stamped on it is either 29850317, or 23850317. The cutting edge is 9-5/8" long the heel is 2-1/2" in height and the spin is a scant 1/16". Handle is Mammoth tooth and stabilized curly Koa. I can't find another blade like this on line and believe me I've looked. $175 shipped/paypal'd CONUS.

Image
Image
Image
Last edited by Mike9 on Sat Oct 14, 2017 6:08 pm, edited 2 times in total.

Chefspence
Posts: 1580
Joined: Thu Jan 26, 2017 11:03 pm

Re: WTS CCK long slicer with custom handle.

Post by Chefspence » Fri Oct 13, 2017 10:02 pm

Wow that's cool as heck

kirkystyle
Posts: 336
Joined: Sat Jan 28, 2017 2:18 pm

Re: WTS CCK long slicer with custom handle.

Post by kirkystyle » Sun Oct 15, 2017 8:44 pm

looks like someone took a CCK small cleaver and turn it into a large bunka. Is the Ferrule chipped or is that just something going on with the pic?

Mike9
Posts: 232
Joined: Fri Jan 27, 2017 9:31 am

Re: WTS CCK long slicer with custom handle.

Post by Mike9 » Mon Oct 16, 2017 6:23 pm

The ferrule is chipped - came that way. At 9.5 inches it's hardy a "small" cleaver. I agree it's been reshaped and a damned fine job of it too. I'll ship it for $150.

Chefspence
Posts: 1580
Joined: Thu Jan 26, 2017 11:03 pm

Re: WTS CCK long slicer with custom handle.

Post by Chefspence » Thu Oct 19, 2017 1:27 pm

What is "spin"

Kalaeb
Posts: 1556
Joined: Thu Jan 26, 2017 8:59 pm
Location: Baltimore, MD

Re: WTS CCK long slicer with custom handle.

Post by Kalaeb » Thu Oct 19, 2017 2:22 pm

Handle alone is worth 150.00.

Is the handle epoxied in, or can it come off?

Chefspence
Posts: 1580
Joined: Thu Jan 26, 2017 11:03 pm

Re: WTS CCK long slicer with custom handle.

Post by Chefspence » Thu Oct 19, 2017 3:02 pm

Wait, so the blade is a 240mm? Didn't know they made the small cleaver that big. The one on cktg says the blade is 215mm. Sorry, I'm jut trying to clarify. How many mm tall is it?

Lepus
Posts: 3556
Joined: Thu Jan 26, 2017 10:06 pm
Location: Durham, NC

Re: WTS CCK long slicer with custom handle.

Post by Lepus » Thu Oct 19, 2017 10:45 pm

It's the spine.

This is a very cool knife.

Chefspence
Posts: 1580
Joined: Thu Jan 26, 2017 11:03 pm

Re: WTS CCK long slicer with custom handle.

Post by Chefspence » Fri Oct 20, 2017 12:13 am

Lepus wrote:
Thu Oct 19, 2017 10:45 pm
It's the spine.

This is a very cool knife.
:lol: that makes much more sense.

Mike9
Posts: 232
Joined: Fri Jan 27, 2017 9:31 am

Re: WTS CCK long slicer with custom handle.

Post by Mike9 » Mon Oct 23, 2017 2:38 pm

The blade is 245mm on the cutting edge, the heel is 63mm high and the spine is 1.7mm thick. I believe the handle is epoxied on there are no pins to be seen. It's a very cool knife and flies through product I'm just letting some of the drawer queens go.

Mike9
Posts: 232
Joined: Fri Jan 27, 2017 9:31 am

Re: WTS CCK long slicer with custom handle.

Post by Mike9 » Sat Oct 28, 2017 6:30 pm

Also the Koa is stabilized and I believe the tooth is as well.

Mike9
Posts: 232
Joined: Fri Jan 27, 2017 9:31 am

Re: WTS CCK long slicer with custom handle.

Post by Mike9 » Tue Oct 31, 2017 6:43 pm

SOLD

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests