Hello,
Ive got this available. I cold forged a bit to bring out a pattern in the steel, I call the finish "ghost cloud". The knife model is called "backpacker"
There is plenty of belly in this design, I wanted to get in as much usable edge as I could in a small length. Specs below:
Steel: 52100 core/ Stainless cladding from Aldo @ New Jersey Steel Baron
Stock Thickness: just under 1/8"
Heat Treat: RC62 by Jarod Todd
Handle: Stabilized Curly Mango from @daliadesigns
Bevel Geometry: Flat grind to .010" behind the edge, tip is what I call "bushcrafter" its pointy but strong enough to do stuff [ATTACH=full]1369691[/ATTACH]
Full tang construction
Pins are G10 and mosaic pin tube.
West systems G flex for epoxy
Blade Length: 3-1/4"
Overall length: 7-3/4"
Width at widest point: 1-1/4"
Asking SOLD shipped CONUS. Thank you for your consideration! Let me know if you have any questions.
Currently Available
Moderator: timos
-
- Posts: 1437
- Joined: Wed Jan 25, 2017 3:01 pm
- Location: oxford, MA
- Has thanked: 100 times
- Been thanked: 133 times
- Contact:
Re: Currently Available
Tim Johnson
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
-
- Posts: 1437
- Joined: Wed Jan 25, 2017 3:01 pm
- Location: oxford, MA
- Has thanked: 100 times
- Been thanked: 133 times
- Contact:
Re: Currently Available
Hello,
Ive got this available. I cold forged a bit to bring out a pattern in the steel, I call the finish "ghost cloud". The knife model is called "backpacker"
There is plenty of belly in this design, I wanted to get in as much usable edge as I could in a small length.
this one is a bit different than my previous. The handle is a little more slim and has a slight palm swell. Specs below:
Steel: 52100 core/ Stainless cladding from Aldo @ New Jersey Steel Baron
Stock Thickness: just under 1/8"
Heat Treat: RC62 by Jarod Todd
Handle: Stabilized Curly Mango from @daliadesigns
Bevel Geometry: Flat grind to .010" behind the edge, tip is what I call "bushcrafter" its pointy but strong enough to do stuff
Full tang construction
Pins are G10 and mosaic pin tube.
West systems G flex for epoxy
Blade Length: 3-1/4"
Overall length: 7-3/4"
Width at widest point: 1-1/4"
Asking $180.00 shipped CONUS. Thank you for your consideration! Let me know if you have any questions.
Ive got this available. I cold forged a bit to bring out a pattern in the steel, I call the finish "ghost cloud". The knife model is called "backpacker"
There is plenty of belly in this design, I wanted to get in as much usable edge as I could in a small length.
this one is a bit different than my previous. The handle is a little more slim and has a slight palm swell. Specs below:
Steel: 52100 core/ Stainless cladding from Aldo @ New Jersey Steel Baron
Stock Thickness: just under 1/8"
Heat Treat: RC62 by Jarod Todd
Handle: Stabilized Curly Mango from @daliadesigns
Bevel Geometry: Flat grind to .010" behind the edge, tip is what I call "bushcrafter" its pointy but strong enough to do stuff
Full tang construction
Pins are G10 and mosaic pin tube.
West systems G flex for epoxy
Blade Length: 3-1/4"
Overall length: 7-3/4"
Width at widest point: 1-1/4"
Asking $180.00 shipped CONUS. Thank you for your consideration! Let me know if you have any questions.
Tim Johnson
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
-
- Posts: 1437
- Joined: Wed Jan 25, 2017 3:01 pm
- Location: oxford, MA
- Has thanked: 100 times
- Been thanked: 133 times
- Contact:
Re: Currently Available
Latest Stainless 6.5" petty chef available tomorrow, 10-31-20 on the website.
Tim Johnson
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos