Western w2 differentially hardened gyuto
-
- Posts: 2359
- Joined: Thu Feb 22, 2018 8:37 am
- Location: Taylor, Az
- Has thanked: 185 times
- Been thanked: 142 times
Western w2 differentially hardened gyuto
I’m excited!!
Ordered a Western Honyaki Gyuto from Carter. I couldn’t wait any longer, I’ve read too many positive comments. I’ve seen to many neat pictures and I’ve read many of the posts on this thread. Placed my ordered and off we go. I’ll post the knife when it’s finished! Basically a 245x51 heel, medium grind, western handle, fun! He showed me several examples of scales, ended up going with cocobolo scales and saya. I think Steve, aka pd7077 here, is taking the dive too. Thanks Carter!!
Ordered a Western Honyaki Gyuto from Carter. I couldn’t wait any longer, I’ve read too many positive comments. I’ve seen to many neat pictures and I’ve read many of the posts on this thread. Placed my ordered and off we go. I’ll post the knife when it’s finished! Basically a 245x51 heel, medium grind, western handle, fun! He showed me several examples of scales, ended up going with cocobolo scales and saya. I think Steve, aka pd7077 here, is taking the dive too. Thanks Carter!!
Last edited by nakneker on Fri Aug 17, 2018 11:04 am, edited 1 time in total.
“The goal is to die with memories, not dreams.”
- mauichef
- Posts: 3992
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 695 times
- Been thanked: 1066 times
- Contact:
Re: Western w2 Honyaki gyuto
Oh my! Sounds really cool Sean. Looking forward to seeing it.
Love the western handle option.
I'm stoked Carter is now doing W2.
Interesting that you are calling it Honyaki.
I know honyaki need to be differentially hardened, which these are.
But some people think they need to be hammered into shape not cut from a bar stock. Even though that bar is "technically" forged.
There seems to be some confusion over the use of the terms honyaki and zen-ko when describing these blades.
What say you Carter? Is it a honyaki or a zen-ko?
Love the western handle option.
I'm stoked Carter is now doing W2.
Interesting that you are calling it Honyaki.
I know honyaki need to be differentially hardened, which these are.
But some people think they need to be hammered into shape not cut from a bar stock. Even though that bar is "technically" forged.
There seems to be some confusion over the use of the terms honyaki and zen-ko when describing these blades.
What say you Carter? Is it a honyaki or a zen-ko?
- pd7077
- Posts: 1045
- Joined: Thu Feb 02, 2017 7:02 pm
- Location: Bay Area, CA
- Has thanked: 66 times
- Been thanked: 106 times
Re: Western w2 Honyaki gyuto
Just to be clear, I don't believe that Carter has ever specifically called them honyaki. I know that in his earlier posts Carter referred to them as being differentially hardened. Ironically, this was a topic of conversation that he and I had a few weeks ago when I first started the process of placing my order with him. Purists will play the semantics game, and they will argue about how culture and tradition should come into play when using the term honyaki. I totally understand where they are coming from. I've seen many western makers refer to their differentially hardened knives as honyaki. I don't have a problem with that either. What is apparent is that the line that differentiates a honyaki from a differentially hardened knife has been blurred. Maybe this is due to the massive influx of new people getting into JKs that don't know the terminology as well as the vets. Maybe it's due to complacency & laziness; it's easier to say honyaki than differentially hardened. My guess is that Sean probably started this thread to help chronicle his first project with Carter and to give us some insight into the whole process rather than to debate the intricacies of the terms honyaki, zenko (stamped), and differentially hardened. I'm looking forward to this thread, and I wouldn't mind if Carter included my knife as well. One thing is for certain...Carter makes fantastic knives, and I always have fun doing projects with him. You're in for a treat, Sean!!!mauichef wrote: ↑Fri Aug 17, 2018 1:02 am Oh my! Sounds really cool Sean. Looking forward to seeing it.
Love the western handle option.
I'm stoked Carter is now doing W2.
Interesting that you are calling it Honyaki.
I know honyaki need to be differentially hardened, which these are.
But some people think they need to be hammered into shape not cut from a bar stock. Even though that bar is "technically" forged.
There seems to be some confusion over the use of the terms honyaki and zen-ko when describing these blades.
What say you Carter? Is it a honyaki or a zen-ko?
Question: Are gluten-free donuts really donuts?
--- Steve
-
- Posts: 2359
- Joined: Thu Feb 22, 2018 8:37 am
- Location: Taylor, Az
- Has thanked: 185 times
- Been thanked: 142 times
Re: Western w2 differentially hardened gyuto
I’ll be the first to admit that my seven months of J knifes hasn’t given me a ton of experience or understanding in terminology. Thus, I went back and edited the thread to “differentially hardened” in the hopes that the thread can focus on why I created it in the first place. I’m excited to do a w2 knife with Carter, pretty simple. Carter mentioned that he may start a thread to share the experience of building my knife and Steve’s. I hope he does, I think many of us would enjoy it.
“The goal is to die with memories, not dreams.”
- mauichef
- Posts: 3992
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 695 times
- Been thanked: 1066 times
- Contact:
Re: Western w2 differentially hardened gyuto
I apologize for the derailing of the thread.
It was not intended as a rebuke of the knife. Carter or anyone else.
It was not intended as a rebuke of the knife. Carter or anyone else.
-
- Posts: 3273
- Joined: Thu Jan 26, 2017 8:59 pm
- Location: Wisconsin
- Has thanked: 209 times
- Been thanked: 391 times
Re: Western w2 differentially hardened gyuto
Interesting. I don't think I have ever seen a full tang diff. hard. knife. Should be cool, can't wait to see some pics. It has me wondering, when doing the hardening, do you dampen the entire tang, or harden the tang and still only soften the spine area?
-
- Posts: 695
- Joined: Sun Jun 17, 2018 12:33 pm
- Location: Bay Area, CA
- Has thanked: 28 times
- Been thanked: 28 times
Re: Western w2 Honyaki gyuto
The answer has to be no haha!
I’m interested in seeing how this turns out too. I have a 247 KS profile from Carter and it’s one of my favorites. I’ve been looking for an excuse to get something else from him. Maybe it’ll be something in “differentially hardened” W2...
-
- Posts: 2359
- Joined: Thu Feb 22, 2018 8:37 am
- Location: Taylor, Az
- Has thanked: 185 times
- Been thanked: 142 times
Re: Western w2 differentially hardened gyuto
No worries Ray, I know it wasn’t intentional. It should be a fun thread. I’m excited.
“The goal is to die with memories, not dreams.”
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: Western w2 differentially hardened gyuto
I have been busy today and this is the first opportunity I have had to respond. Let me say right off the bat, no one did or said anything that is offensive and I hope all you guys are good...I am. I have personally spoken with Sean and Ray today and I think we are ready to move on and focus on the knife build. If you guys want, we can start a new thread about honyaki technicalities in the General Forum...might be interesting.
First off, thanks to Sean for starting this thread, and for ordering a knife that I am excited to work on. Also thanks to Steve, I will be building a knife for him as well. Both Sean and Steve have graciously let me document the build process of their knives. The last time I did a documentation was the Slab Town Pizza 3 Anryu Handle Project in the Old Forum (https://www.chefknivestogoforum.com/set ... 10709.html), it was a very popular thread.
Now regarding the term honyaki. It is not a term that I would use for my knives, it sounds pretentious, and maybe my knives aren't honyaki because they are not tamahagane steel or due to the fact that they are not forged. They are built in a honyaki fashion of being monosteel that is differentially hardened and quenched in water or oil. The people that buy my knives know they are made in the honyaki style, so I do not need to state it, I refer to them as differentially hardened monosteel blades.
Matt brings up an interesting point, and one that I had not given any thought to....my initial thought is that I will not clay the tang area. I have had two knifes crack in the curve of the choil....kind of want to keep the clay a little ways away from that area and sweeping up into the handle.
I am excited about this project and have a commitment for two knives, and possibly a third. I will likely make four blade blanks....if anyone else is interested....now is the time to let me know.
Again, I appreciate the feedback from you guys the lively conversation and differing viewpoints is good...that is how we learn. The nice thing about our Forum and the people associated with it, is that for the most part everyone plays nicely.....Let the fun begin, I will probably start posting in the next few days.
Below is a teaser pic, it is the initial prototype...we are going to make some adjustments to the handle area, but this is version #1 and it will be the template for the build going forward. At this point it has been profiled and has been through normalizing in the kiln...4 different heating segments of 1,600F down to 1,425F and air cooled between sessions.
First off, thanks to Sean for starting this thread, and for ordering a knife that I am excited to work on. Also thanks to Steve, I will be building a knife for him as well. Both Sean and Steve have graciously let me document the build process of their knives. The last time I did a documentation was the Slab Town Pizza 3 Anryu Handle Project in the Old Forum (https://www.chefknivestogoforum.com/set ... 10709.html), it was a very popular thread.
Now regarding the term honyaki. It is not a term that I would use for my knives, it sounds pretentious, and maybe my knives aren't honyaki because they are not tamahagane steel or due to the fact that they are not forged. They are built in a honyaki fashion of being monosteel that is differentially hardened and quenched in water or oil. The people that buy my knives know they are made in the honyaki style, so I do not need to state it, I refer to them as differentially hardened monosteel blades.
Matt brings up an interesting point, and one that I had not given any thought to....my initial thought is that I will not clay the tang area. I have had two knifes crack in the curve of the choil....kind of want to keep the clay a little ways away from that area and sweeping up into the handle.
I am excited about this project and have a commitment for two knives, and possibly a third. I will likely make four blade blanks....if anyone else is interested....now is the time to let me know.
Again, I appreciate the feedback from you guys the lively conversation and differing viewpoints is good...that is how we learn. The nice thing about our Forum and the people associated with it, is that for the most part everyone plays nicely.....Let the fun begin, I will probably start posting in the next few days.
Below is a teaser pic, it is the initial prototype...we are going to make some adjustments to the handle area, but this is version #1 and it will be the template for the build going forward. At this point it has been profiled and has been through normalizing in the kiln...4 different heating segments of 1,600F down to 1,425F and air cooled between sessions.
- mauichef
- Posts: 3992
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 695 times
- Been thanked: 1066 times
- Contact:
Re: Western w2 differentially hardened gyuto
I'm really grateful for the input and kind words from you, Sean and Steve.
I think I may start a new thread on the subject.
It is kind of nerdish but what the hell.
Meanwhile that profile looks so nice Carter.
I see you have reshaped the tip area a bit and I like it.
Whatever it's called I want one and am very excited for you in this new endeavor.
I also love that it's a Western.
Not enough of those around IMO.
Have great weekend everyone.
Aloha!
I think I may start a new thread on the subject.
It is kind of nerdish but what the hell.
Meanwhile that profile looks so nice Carter.
I see you have reshaped the tip area a bit and I like it.
Whatever it's called I want one and am very excited for you in this new endeavor.
I also love that it's a Western.
Not enough of those around IMO.
Have great weekend everyone.
Aloha!
-
- Posts: 2359
- Joined: Thu Feb 22, 2018 8:37 am
- Location: Taylor, Az
- Has thanked: 185 times
- Been thanked: 142 times
Re: Western w2 differentially hardened gyuto
Well said Carter. Thanks for sharing the whole build process. Let the fun begin!!Carter wrote: ↑Fri Aug 17, 2018 2:19 pm I have been busy today and this is the first opportunity I have had to respond. Let me say right off the bat, no one did or said anything that is offensive and I hope all you guys are good...I am. I have personally spoken with Sean and Ray today and I think we are ready to move on and focus on the knife build. If you guys want, we can start a new thread about honyaki technicalities in the General Forum...might be interesting.
First off, thanks to Sean for starting this thread, and for ordering a knife that I am excited to work on. Also thanks to Steve, I will be building a knife for him as well. Both Sean and Steve have graciously let me document the build process of their knives. The last time I did a documentation was the Slab Town Pizza 3 Anryu Handle Project in the Old Forum (https://www.chefknivestogoforum.com/set ... 10709.html), it was a very popular thread.
Now regarding the term honyaki. It is not a term that I would use for my knives, it sounds pretentious, and maybe my knives aren't honyaki because they are not tamahagane steel or due to the fact that they are not forged. They are built in a honyaki fashion of being monosteel that is differentially hardened and quenched in water or oil. The people that buy my knives know they are made in the honyaki style, so I do not need to state it, I refer to them as differentially hardened monosteel blades.
Matt brings up an interesting point, and one that I had not given any thought to....my initial thought is that I will not clay the tang area. I have had two knifes crack in the curve of the choil....kind of want to keep the clay a little ways away from that area and sweeping up into the handle.
I am excited about this project and have a commitment for two knives, and possibly a third. I will likely make four blade blanks....if anyone else is interested....now is the time to let me know.
Again, I appreciate the feedback from you guys the lively conversation and differing viewpoints is good...that is how we learn. The nice thing about our Forum and the people associated with it, is that for the most part everyone plays nicely.....Let the fun begin, I will probably start posting in the next few days.
Below is a teaser pic, it is the initial prototype...we are going to make some adjustments to the handle area, but this is version #1 and it will be the template for the build going forward. At this point it has been profiled and has been through normalizing in the kiln...4 different heating segments of 1,600F down to 1,425F and air cooled between sessions.
“The goal is to die with memories, not dreams.”
-
- Posts: 2359
- Joined: Thu Feb 22, 2018 8:37 am
- Location: Taylor, Az
- Has thanked: 185 times
- Been thanked: 142 times
Re: Western w2 differentially hardened gyuto
I agree Ray, I like the profile mucho mucho. I only have a couple westerns, I’m excited for this knife and appreciate Carter’s enthusiasm.mauichef wrote: ↑Fri Aug 17, 2018 2:39 pm I'm really grateful for the input and kind words for you, Sean and Steve.
I think I may start a new thread on the subject.
It is kind of nerdish but what the hell.
Meanwhile that profile looks so nice Carter.
I see you have reshaped the tip area a bit and I like it.
Whatever it's called I want one and am very excited for you in this new endeavor.
I also love that it's a Western.
Not enough of those around IMO.
Have great weekend everyone.
Aloha!
I hope Maui treats you well this weekend. Grab a fruity drink and enjoy a wave or two for me please!!
“The goal is to die with memories, not dreams.”
- pd7077
- Posts: 1045
- Joined: Thu Feb 02, 2017 7:02 pm
- Location: Bay Area, CA
- Has thanked: 66 times
- Been thanked: 106 times
Re: Western w2 differentially hardened gyuto
Totally agree, Ray. I’ve been looking for a diff hardened western for a while, and since I’ve been fortunate enough to handle a few of Carter’s knives, I felt like this was the perfect opportunity for me to finally snag one. Carter and I have been emailing for the past few days in order to refine the handle dimensions a bit, and I think that we came up with something that I will really love.mauichef wrote: ↑Fri Aug 17, 2018 2:39 pm I'm really grateful for the input and kind words for you, Sean and Steve.
I think I may start a new thread on the subject.
It is kind of nerdish but what the hell.
Meanwhile that profile looks so nice Carter.
I see you have reshaped the tip area a bit and I like it.
Whatever it's called I want one and am very excited for you in this new endeavor.
I also love that it's a Western.
Not enough of those around IMO.
Have great weekend everyone.
Aloha!
--- Steve
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: Western w2 differentially hardened gyuto
Sean asked about wood choices that would be suitable for a matching handle and saya. Shown here are Amazon rosewood, cocobolo, ebony, snakewood, and teak. He chose cocobolo.
FYI....I just finished the cocobolo nakiri, it 52100 and is 180mm long...it is for sale, just haven't posted it yet.
FYI....I just finished the cocobolo nakiri, it 52100 and is 180mm long...it is for sale, just haven't posted it yet.
- mauichef
- Posts: 3992
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 695 times
- Been thanked: 1066 times
- Contact:
Re: Western w2 differentially hardened gyuto
Love that western Carter. I can see that with ebony looking very smart and tux like!
What is the gold?
What is the gold?
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: Western w2 differentially hardened gyuto
The bottowm gyuto??? Snakewood w/ brass.
Here is a western in an ebony tux.
- mauichef
- Posts: 3992
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 695 times
- Been thanked: 1066 times
- Contact:
- mauichef
- Posts: 3992
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 695 times
- Been thanked: 1066 times
- Contact:
Re: Western w2 differentially hardened gyuto
I have started a new thread about Honyaki so please visit there to post further comments on this subject.
viewtopic.php?f=3&t=7605
viewtopic.php?f=3&t=7605
-
- Posts: 2359
- Joined: Thu Feb 22, 2018 8:37 am
- Location: Taylor, Az
- Has thanked: 185 times
- Been thanked: 142 times
Re: Western w2 differentially hardened gyuto
I like this!mauichef wrote: ↑Sun Aug 19, 2018 12:30 pm I have started a new thread about Honyaki so please visit there to post further comments on this subject.
viewtopic.php?f=3&t=7605
“The goal is to die with memories, not dreams.”