Looking Glass Edges
Moderator: Peter Nowlan
-
- Posts: 1281
- Joined: Tue Jan 31, 2017 12:05 pm
- Been thanked: 57 times
Looking Glass Edges
I had two identical Spderco folders come in so I decided to experiment a little and do one freehand and the other on the Edge Pro Professional using the same brand of stones and grit.
The sequence was Naniwa Chosera 400, 1k, 3k, 5k, 10k for both. No stropping of any form.
Freehand on top..
I always find that the polish really starts to show at the Chosera 3k level and I could stop at the 5k. I use a lot of water and I spend a lot of time on the 400 with many adjustments in pressure.
-
- Posts: 1281
- Joined: Tue Jan 31, 2017 12:05 pm
- Been thanked: 57 times
Re: Looking Glass Edges
Yes it was. Typically if a customer wants a polished edge I'll use the EP on folders. I just felt like doing one freehand to see if it would turn out. I find it more difficult freehand to polish the bevels. They both feel just as sharp.
- Jeff B
- Posts: 14773
- Joined: Fri Jan 27, 2017 5:59 pm
- Location: Louisville, Kentucky
- Has thanked: 1995 times
- Been thanked: 2366 times
Re: Looking Glass Edges
Excellent Peter! I don't know if the EP is easier for that situation but your freehand is just as nice!
If God wanted me to be a vegetarian he wouldn't have made animals taste so good.
-
- Posts: 1281
- Joined: Tue Jan 31, 2017 12:05 pm
- Been thanked: 57 times
Re: Looking Glass Edges
Thanks
It doesn't always turn out as well as the EP, depends on the size of the Bevels I suppose and how much surface area there is. The next time I'm going to take pics at each grit to see the difference
It doesn't always turn out as well as the EP, depends on the size of the Bevels I suppose and how much surface area there is. The next time I'm going to take pics at each grit to see the difference
-
- Posts: 2499
- Joined: Fri Jan 27, 2017 11:46 am
- Location: Long Island
- Has thanked: 120 times
- Been thanked: 457 times
Re: Looking Glass Edges
Wow. That's incredible. Something new to work to try to learn how to do. No stropping?
Thanks for posting. Off the cuff without it I wouldn't have known it was possible.
Thanks for posting. Off the cuff without it I wouldn't have known it was possible.
-
- Posts: 1281
- Joined: Tue Jan 31, 2017 12:05 pm
- Been thanked: 57 times
Re: Looking Glass Edges
Hi, I bet you could do this. I've never relied on any strops and compounds to achieve the final polish. I am in now way suggesting that they are no effective, I just don't use them. Maybe I should and I will to see what happens, I'll do it next time.
I was taught how to do this from others and it always comes down to having patience with the first stone and manipulating pressure on it. I'm pretty sure lots of folks do this on a regular basis so give it a shot.
Also, these type of finishes are purely aesthetic in nature, not that Important in my opinion. I see it as a challenge and something enjoyable. If Point A is Dull then my destination is Point B, as sharp as I can make it and a happy owner. The polished bevels are optional points along the way, far less important.
I was taught how to do this from others and it always comes down to having patience with the first stone and manipulating pressure on it. I'm pretty sure lots of folks do this on a regular basis so give it a shot.
Also, these type of finishes are purely aesthetic in nature, not that Important in my opinion. I see it as a challenge and something enjoyable. If Point A is Dull then my destination is Point B, as sharp as I can make it and a happy owner. The polished bevels are optional points along the way, far less important.