New Knives For Sale
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
New Knives For Sale
This is a new thread and will be where I list all new blades for sale. My "Recent Work" thread will be work in progress and general postings.
To start off this new post, I have a 215mm gyuto made of 52100 carbon steel heat treated to 62HRC. The handle is dyed and stabilized maple burl with a ferrule and endcap of black buffalo horn and nickel-silver spacers. The knife weighs 5.85oz and has a heel height of 47mm. It is a thin and nimble performer. Asking price is $330.
Thanks for looking.
To start off this new post, I have a 215mm gyuto made of 52100 carbon steel heat treated to 62HRC. The handle is dyed and stabilized maple burl with a ferrule and endcap of black buffalo horn and nickel-silver spacers. The knife weighs 5.85oz and has a heel height of 47mm. It is a thin and nimble performer. Asking price is $330.
Thanks for looking.
-
- Posts: 1447
- Joined: Wed Jan 25, 2017 3:01 pm
- Location: oxford, MA
- Has thanked: 105 times
- Been thanked: 136 times
- Contact:
Re: New Knives For Sale
looks awesome carter! your heat treat is awesome too!
Tim Johnson
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
Oxford, MA
“In the beginner’s mind there are many possibilities, but in the expert’s there are few”
--s. suzuki
Web: http://www.timothyjohnsonknives.com
Email: tim@blackstoneknife.com
Instagram: @timostheos
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
Here is a matched set, a 240mm gyuto and a 150mm petty. Both are made of 52100 treated to 62HRC. The handles are dyed and stabilized Oregon maple burl with a ferrule and endcap made of black buffalo horn and nickel-silver spacers. The sayas are figured claro walnut with hand turned and knurled nickel-silver pins. The gyuto is ground thin, while not a laser, it is on the thinner side, but is stiff enough to handle tough ingredients. Asking $840.
Thanks for looking.
Thanks for looking.
Re: New Knives For Sale
That set is sweet! 52100 at HRC 62 will knock people's socks off, great steel in a couple beautiful packages!
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
This is a 155mm petty made of 52100 and has been heat treated to 62HRC. I made this as a tall petty, it is 37mm at the heel, and the handle is angled upwards a few degrees so that there is plenty of knuckle clearance. This should be a good all around utility knife. It is ground quite thin and has a distal taper beginning at about 2/3rd's down the spine. Then handle is end cut royal palm with buffalo horn and nickel-silver spacers. The saya is also royal palm and has a hand turned nickel-silver pin. Asking $325.
Thanks for looking.
Thanks for looking.
- Jeff B
- Posts: 14773
- Joined: Fri Jan 27, 2017 5:59 pm
- Location: Louisville, Kentucky
- Has thanked: 1997 times
- Been thanked: 2366 times
Re: New Knives For Sale
Like the variations you put into your blades Carter, very nice!
If God wanted me to be a vegetarian he wouldn't have made animals taste so good.
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
Here is the latest batch of knives I am making...they are all 52100 carbon steel hardened to 62HRC. The length and height are marked in mm on each blade. These are all available for customization and purchase.
Thanks for looking.
Thanks for looking.
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
Here are 4 knives that are ready for custom handles. If you are interested in purchasing one and designing a custom handle, please PM me for info and pricing. The blades are 52100 carbon steel heat treated to 62HRC. The numbers on the blades represent the length and height, in MM.
Thanks for looking.
Thanks for looking.
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
This is the 240mm Kiritsuke that was reviewed by Steve Gamache and was involved in a pass around. I have reconditioned to the same level of finish as when it was new. The blade is 52100 carbon steel heat treated to 62HRC. The handle is Gaboon Ebony with a buffalo horn ferrule and encap. The spacer and mosaic pin are nickel-silver. The saya is Gaboon Ebony with a hand turned and knurled nickel-silver pin. The tip on this knife is very thin.
Here is a link to the video review by Steve: https://www.youtube.com/watch?v=aQoZZa52Dkw
I have discounted this knife since it was in the pass around, asking $375.
Thanks for looking.
Here is a link to the video review by Steve: https://www.youtube.com/watch?v=aQoZZa52Dkw
I have discounted this knife since it was in the pass around, asking $375.
Thanks for looking.
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
Two blades are ready for sale....if you are interested, drop me a PM or email.
247mm KS profile guyto made of 52100 at 62HRC. The blade height is 48mm. The handle is Gaboon ebony with nickel silver spacers.
This is a 155mm tall petty. The blade is 52100 at 62HRC and is 36mm tall. The handle is redwood burl with buffalo horn and nickel-silver accents.
Thanks for looking.
247mm KS profile guyto made of 52100 at 62HRC. The blade height is 48mm. The handle is Gaboon ebony with nickel silver spacers.
This is a 155mm tall petty. The blade is 52100 at 62HRC and is 36mm tall. The handle is redwood burl with buffalo horn and nickel-silver accents.
Thanks for looking.
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
Here are three completed W2 blades for sale. The handles have not be mounted yet, in the event a saya is also wanted. The blades are differentially hardened and etched, they are approx 62HRC. The top blade is a 200mm line knife with a cascara buckthorne handle, the middle knife is a 150mm honesuki with a ringed gidgee handle, and the bottom knife is a 150mm tall petty with a bloodwood handle. Please msg or email me, if you are interested.
- mauichef
- Posts: 4006
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 712 times
- Been thanked: 1086 times
- Contact:
Re: New Knives For Sale
Love the look of the Honosuki. But they all look very sweet.
Nice one Carter.
Nice one Carter.
-
- Posts: 1152
- Joined: Wed Jan 25, 2017 2:58 pm
- Location: Hendersonville, NC
- Has thanked: 2 times
- Been thanked: 19 times
- Contact:
Re: New Knives For Sale
This is a 180mm Nakiri made of 52100 carbon steel that is approximately 62HRC. The blade height is 57mm at the heel. This knife has a matching cocobolo handle and saya, the accents on the handle are black buffalo horn and nickel-silver, as is the saya pin. Please send me a PM or email, carter@ciibladeworks.com, if you are interested.
Thanks for looking.
Thanks for looking.