Babyuto
- HHH Knives
- Posts: 330
- Joined: Wed Jan 25, 2017 2:57 pm
- Been thanked: 4 times
Babyuto
I am gona dub thee.. "Babyuto"
Very pleased with this blade profile/ size and specs. I plan to offer it as a option to future clients..
Specs. Blade is HHH Feather damascus High Carbon.
Handle is a combination of African Black wood and Fossil Mammoth tooth/molar
Very pleased with this blade profile/ size and specs. I plan to offer it as a option to future clients..
Specs. Blade is HHH Feather damascus High Carbon.
Handle is a combination of African Black wood and Fossil Mammoth tooth/molar
HHH Knives, Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth & Guided by the spirit!
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
- mauichef
- Posts: 3974
- Joined: Thu Jan 26, 2017 9:10 pm
- Location: Boca Chica, Panama
- Has thanked: 675 times
- Been thanked: 1021 times
- Contact:
- HHH Knives
- Posts: 330
- Joined: Wed Jan 25, 2017 2:57 pm
- Been thanked: 4 times
Re: Babyuto
Thank you all for the comments and checking out the thread. I really do think this blade profile and handle combination Rocks! Its tall enough to comfortably use it on a board without banging your Knuckles. Blade is long enough for most tasks. Its gona be a GO TO knife..
Blessings
HHH Knives, Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth & Guided by the spirit!
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
- Jeff B
- Posts: 14741
- Joined: Fri Jan 27, 2017 5:59 pm
- Location: Louisville, Kentucky
- Has thanked: 1954 times
- Been thanked: 2324 times
Re: Babyuto
TOO....COOL....
If God wanted me to be a vegetarian he wouldn't have made animals taste so good.
- HHH Knives
- Posts: 330
- Joined: Wed Jan 25, 2017 2:57 pm
- Been thanked: 4 times
Re: Babyuto
They will be in the 6 1/4" range. with 47/48 height.
HHH Knives, Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth & Guided by the spirit!
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
- HHH Knives
- Posts: 330
- Joined: Wed Jan 25, 2017 2:57 pm
- Been thanked: 4 times
Re: Babyuto
I have had many requests for this as a PRE BUY. Which is awesome. However I am currently a little behind sced. on my custom orders. Thinking about this. IF I move forward I would have to put a New Years 2017 completion date on them.. This will allow me to get caught up and complete all of my 1017 orders B4 these get started. Seems like a fair way to go.. and for me worth the added weeks of work during the last part of Dec.
Here is what I am thinking. no more then 10 to 12 Pre Buy knives.. You are welcome to order one of each style if desired.
Babyuto Blade is approx 6 1/4" and just under 2" at the heel. Profile and handle style like the original. OAL approx 11.5"
The knife will be San Mai with Blue#2 core. HRC 63 standard western handle material Ironwood. Pins to be determined. 2 standard and 1 mosaic. $600.00
OR..
HHH Feather Damascus HRC 61 with Bolster/handle spacer combination. Materials to be African Black wood Bolsters and Ironwood burl handles. Spacer config and pin materials TBD 2 standard and one mosaic. $1100.00
OK so this is not 100% set in stone yet. But I wanted to gauge interest. Your welcome to post here or PM And as I move forward I will contact you based on these communications. Your comment does not signify you are IN no more then this post says This is a 100% set in stone Pre Buy Yet.. But to be fair I will reach out to the guys who show interest FIRST B4 I open up a special PRE BUY THREAD..
Thoughts?? Hmmmmmmmmmm............
Here is what I am thinking. no more then 10 to 12 Pre Buy knives.. You are welcome to order one of each style if desired.
Babyuto Blade is approx 6 1/4" and just under 2" at the heel. Profile and handle style like the original. OAL approx 11.5"
The knife will be San Mai with Blue#2 core. HRC 63 standard western handle material Ironwood. Pins to be determined. 2 standard and 1 mosaic. $600.00
OR..
HHH Feather Damascus HRC 61 with Bolster/handle spacer combination. Materials to be African Black wood Bolsters and Ironwood burl handles. Spacer config and pin materials TBD 2 standard and one mosaic. $1100.00
OK so this is not 100% set in stone yet. But I wanted to gauge interest. Your welcome to post here or PM And as I move forward I will contact you based on these communications. Your comment does not signify you are IN no more then this post says This is a 100% set in stone Pre Buy Yet.. But to be fair I will reach out to the guys who show interest FIRST B4 I open up a special PRE BUY THREAD..
Thoughts?? Hmmmmmmmmmm............
HHH Knives, Inspired by God, Forged by Fire, Tempered by Water, Grounded by Earth & Guided by the spirit!
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com
God is GOOD, ALL the time!!!
Randy Haas
http://hhhcustomknives.com