Kurosaki laser 210

See what's happening with current or completed "Pass Arounds". Forum members occasionally send knives or sharpening stones around to a hand selected group of participants for short term use and feedback/reviews.
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Kurosaki laser 210

Post by Chefspence »

Ok let's get this around. What a great knife I haven't used it in a pro environment but think it's well suited.
Requirements;
100 post min
Use it and review it; on this post and product page at least. You can also put it in the product review area
Use it, sharpen it, have fun
Above all, treat it like it's your own!!
If you happen to chip it, tip it, or something worse, be prepar d to fix it or pay for its fixes. It's tough to think someone's gong to use who doesn't have to care about it, but care for it please.
One week of use.
Limit of five

I like this knife a lot.
Besides that, I think it's mostly some common sense points of etiquette...
~ Be wary of rust formation,,.. wipe and dry often.
~ Leaving a patina is nice but if you get the beginnings of rust, by all means clean it off.
~ Use the knife as if it were your own. You shouldn't need to baby it too much, but certainly don't push it to/past it's limits.
~ Apply a light bit of tsubaki (or similar) oil to the blade during shipping.
~ Pass it on in a timely manner
~ Insure the knife for it's value during shipping.
..I'm not sure it this is a requirement but I've always paid the extra for a required signature upon delivery during shipping. (communicating w/ the recipient before you ship it is a good idea here, to make sure they can receive it, etc..)

There's a couple people in already, so act quick...
User avatar
sharksfan7
Posts: 443
Joined: Thu Jan 26, 2017 10:53 pm
Location: San Diego, CA
Has thanked: 16 times
Been thanked: 5 times

Re: Kurosaki laser 210

Post by sharksfan7 »

Would love to be included, Spence. Hoping to get a 240 once they're available again. This would be my first pass around to participate in. Thanks for offering this up.
--Tony
User avatar
pd7077
Posts: 1045
Joined: Thu Feb 02, 2017 7:02 pm
Location: Bay Area, CA
Has thanked: 66 times
Been thanked: 106 times

Re: Kurosaki laser 210

Post by pd7077 »

I would like to be a part of this passaround if possible. This would be my first as well. Never used a laser before so this would be a great experience. Thanks for your generosity Spence!
--- Steve
Nmiller21k
Posts: 2822
Joined: Thu Jan 26, 2017 11:55 pm
Location: Minnesota
Has thanked: 6 times
Been thanked: 68 times

Re: Kurosaki laser 210

Post by Nmiller21k »

This line is amazing. Pd it's not a "true" laser but it certainly acts like one.
Cutuu
Posts: 3535
Joined: Thu Jan 26, 2017 9:00 pm
Has thanked: 285 times
Been thanked: 105 times

Re: Kurosaki laser 210

Post by Cutuu »

Id like in
User avatar
pd7077
Posts: 1045
Joined: Thu Feb 02, 2017 7:02 pm
Location: Bay Area, CA
Has thanked: 66 times
Been thanked: 106 times

Re: Kurosaki laser 210

Post by pd7077 »

Nmiller21k wrote: Fri Jul 28, 2017 6:46 am This line is amazing. Pd it's not a "true" laser but it certainly acts like one.
Thanks, I never realized that. Just took a look at the product page, and the choil shot def doesn't look laserish. Still very interested though as I've been considering picking up a Kurosaki.
--- Steve
Nmiller21k
Posts: 2822
Joined: Thu Jan 26, 2017 11:55 pm
Location: Minnesota
Has thanked: 6 times
Been thanked: 68 times

Re: Kurosaki laser 210

Post by Nmiller21k »

It's a great line
Acts like a laser and great cutting performance
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

Well I've had the most interest in this one, sorry to say not everyone can be included. I don't want this to be gone that long.

So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett

I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me :D. I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.

So this knife is no longer open to anymore peeps. Thanks guys.
User avatar
sharksfan7
Posts: 443
Joined: Thu Jan 26, 2017 10:53 pm
Location: San Diego, CA
Has thanked: 16 times
Been thanked: 5 times

Re: Kurosaki laser 210

Post by sharksfan7 »

Chefspence wrote: Fri Aug 04, 2017 6:50 pm Well I've had the most interest in this one, sorry to say not everyone can be included. I don't want this to be gone that long.

So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett

I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me :D. I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.

So this knife is no longer open to anymore peeps. Thanks guys.
I'm down in SoCal, Spence. But it looks like Pd7077 is in the Bay Area as well, so perhaps he can step in as bounty hunter.
--Tony
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

Ok Pd, you're dog the bounty hunter on that this one. To all, send me your shipping info so I can figure a rotation. This one has been used very lightly, I don't think it needs a sharpening at all to start, but if you want, strop it up.
User avatar
pd7077
Posts: 1045
Joined: Thu Feb 02, 2017 7:02 pm
Location: Bay Area, CA
Has thanked: 66 times
Been thanked: 106 times

Re: Kurosaki laser 210

Post by pd7077 »

sharksfan7 wrote: Fri Aug 04, 2017 7:54 pm
Chefspence wrote: Fri Aug 04, 2017 6:50 pm Well I've had the most interest in this one, sorry to say not everyone can be included. I don't want this to be gone that long.

So,
Cutu
Sharksfan
Datster
Pd7077
Jdbennett

I'm opening it up to those with less than 100posts, but only took those with the most posts. Fair? Sharksfan, jd is in the Bay Area so if he messes around you have to go after him for me :D. I know that just because you don't have 100 posts, doesn't mean you'll do anything stupid, I get it, but just putting my trust in you so live up to it please.

So this knife is no longer open to anymore peeps. Thanks guys.
I'm down in SoCal, Spence. But it looks like Pd7077 is in the Bay Area as well, so perhaps he can step in as bounty hunter.
Yup, I'm in the Bay Area so I'll do what's needed :twisted:
--- Steve
cjmeik
Posts: 814
Joined: Fri Jan 27, 2017 6:08 am
Location: Georgia
Contact:

Re: Kurosaki laser 210

Post by cjmeik »

If you'll take another... ;) Such a ho, I know.
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

cjmeik wrote: Fri Aug 04, 2017 8:51 pm If you'll take another... ;) Such a ho, I know.
Ok fine ;) Thank jmcnelly for sending me a knife to play with while all these are away.
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

Addresses. One week please
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

Just sent he knife out!
Cutuu
Posts: 3535
Joined: Thu Jan 26, 2017 9:00 pm
Has thanked: 285 times
Been thanked: 105 times

Re: Kurosaki laser 210

Post by Cutuu »

I got it. It came quick. Looks great!
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

Good thank you letting me know
User avatar
sharksfan7
Posts: 443
Joined: Thu Jan 26, 2017 10:53 pm
Location: San Diego, CA
Has thanked: 16 times
Been thanked: 5 times

Re: Kurosaki laser 210

Post by sharksfan7 »

Hey Spence. Are we going in the order you listed earlier? I need to make sure I'm around when my turn pops up. I'm not really going to have much time next week, 8/28-9/1, so I wouldn't mind waiting until after the Bay Area guys have a go. Thanks.
--Tony
Chefspence
Posts: 2504
Joined: Thu Jan 26, 2017 11:03 pm
Has thanked: 2 times
Been thanked: 32 times

Re: Kurosaki laser 210

Post by Chefspence »

sharksfan7 wrote: Mon Aug 21, 2017 5:44 pm Hey Spence. Are we going in the order you listed earlier? I need to make sure I'm around when my turn pops up. I'm not really going to have much time next week, 8/28-9/1, so I wouldn't mind waiting until after the Bay Area guys have a go. Thanks.
No, sorry I'm making the list as we speak. It's going east coast first so you've got time :)
User avatar
sharksfan7
Posts: 443
Joined: Thu Jan 26, 2017 10:53 pm
Location: San Diego, CA
Has thanked: 16 times
Been thanked: 5 times

Re: Kurosaki laser 210

Post by sharksfan7 »

Chefspence wrote: Mon Aug 21, 2017 5:46 pm
No, sorry I'm making the list as we speak. It's going east coast first so you've got time :)
Cool. Thanks.
--Tony
Post Reply