Recent Work

Moderator: Carter

Carter
Posts: 752
Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC

Re: Recent Work

Post by Carter » Tue Apr 24, 2018 11:03 pm

Thx guys. Shop is always open...there might be a fridge on the other side of the shop with cold beverages....for after work!

Carter
Posts: 752
Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC

Re: Recent Work

Post by Carter » Thu May 03, 2018 2:03 pm

Here are some knives nearing completion that will be available for purchase soon. From the top down: 245mm KS style gyuto with ebony and nickel-silver handle, 180mm nakiri with a royal palm handle, and a 155mm tall petty with a redwood burl handle. The blades are 52100 carbon steel at 62/3HRC.

Image

Carter
Posts: 752
Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC

Re: Recent Work

Post by Carter » Wed May 09, 2018 11:11 am

Here are a couple of tall petty's (approx 36-37mm tall) that are shipping out today. Both are 52100 carbon steel at 62HRC. The top knife with the K-tip is 160mm and has a dyed and stabilized buckeye burl handle with buffalo horn and nickel-silver accents. The bottom knife is 150mm and has a dyed and stabilized maple burl handle with horn and nickel-silver accents.

Made a mistake in the original posting....the top saya is Indian ebony and the bottom is East Indian rosewood.

Image

Image

Thanks for looking.

Carter
Posts: 752
Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC

Re: Recent Work

Post by Carter » Fri Jun 08, 2018 11:49 am

I've been busy out of the shop for the past few weeks and a little slack on posting, but here are a couple of projects that I'm wrapping up.

3 sayas and one custom handle. The handle is on an Anryu 240mm hammered gyuto, the 2 other sayas are for Takaeda's.
Image

2 more sayas for a Moritaka and an Anryu.
Image

Thanks for looking.

Carter
Posts: 752
Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC

Re: Recent Work

Post by Carter » Tue Jun 19, 2018 8:38 am

The finished sayas....top is Granadillo and bottom is Wenge.

Image

milkbaby
Posts: 553
Joined: Sun Jan 29, 2017 11:12 am

Re: Recent Work

Post by milkbaby » Tue Jun 19, 2018 9:24 am

Great looking work as always!

What finish are you using on the sayas?

Carter
Posts: 752
Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC

Re: Recent Work

Post by Carter » Tue Jun 19, 2018 9:27 am

milkbaby wrote:
Tue Jun 19, 2018 9:24 am
Great looking work as always!

What finish are you using on the sayas?
Thx buddy....TruOil is my go to finish, usually 5-8 coats depending on the wood. On the Wenge, I applied several coats of CA to fill grain and micro cracks, then TruOil.

User avatar
Jeff B
Posts: 9689
Joined: Fri Jan 27, 2017 5:59 pm
Location: Kentucky

Re: Recent Work

Post by Jeff B » Tue Jun 19, 2018 4:50 pm

Well Carter...your work is looking pretty subpar, might be time to retire. :P
If God wanted me to be a vegetarian he wouldn't have made animals taste so good.

btbyrd
Posts: 80
Joined: Sat Sep 30, 2017 10:01 am

Re: Recent Work

Post by btbyrd » Tue Jun 19, 2018 6:38 pm

Here are some glamour shots of my Anryu 240 with handle/saya from Carter.

Image

Image

And the Takeda sayas.

Image

Beautiful work.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests