For questions/topics that don't fit into the other, more specific forums.
horriblebreast
Posts: 35 Joined: Mon Jun 12, 2017 7:01 pm
Location: minnesota
Has thanked: 1 time
Been thanked: 1 time
Contact:
Post
by horriblebreast » Mon Sep 04, 2017 10:40 pm
WKfiretiny.png (153.77 KiB) Viewed 10841 times
WKlogotiny.png (176.47 KiB) Viewed 10841 times
milkbaby
Posts: 594 Joined: Sun Jan 29, 2017 11:12 am
Location: Sunny Florida
Been thanked: 2 times
Post
by milkbaby » Tue Sep 05, 2017 11:44 pm
Reminds me of graffiti art! You're not going to try to chisel that on your blades as a maker's mark, are you?
horriblebreast
Posts: 35 Joined: Mon Jun 12, 2017 7:01 pm
Location: minnesota
Has thanked: 1 time
Been thanked: 1 time
Contact:
Post
by horriblebreast » Wed Sep 06, 2017 1:36 am
oh just some non-official unsanctioned fun i figured i'd share
Willison_Knives
Posts: 225 Joined: Thu Feb 23, 2017 2:20 pm
Location: St.Catharines On, CANADA
Contact:
Post
by Willison_Knives » Mon Sep 11, 2017 1:33 pm
Just noticed this. Thsee are fantastic, but I could never chisel them. If anything I would try getting a stencil made to electro etch. But I have had zero responses from company's who make stencils.
Dakota J. Willison
Willison Knives
milkbaby
Posts: 594 Joined: Sun Jan 29, 2017 11:12 am
Location: Sunny Florida
Been thanked: 2 times
Post
by milkbaby » Tue Sep 12, 2017 12:57 pm
Did you try contacting Tustech.com or img-electromark.com?
milkbaby
Posts: 594 Joined: Sun Jan 29, 2017 11:12 am
Location: Sunny Florida
Been thanked: 2 times
Post
by milkbaby » Tue Sep 12, 2017 12:59 pm
A large number of makers use stencils and electro etching for their mark, you should be able to source them easily. Maybe ask Tim or Carter for their recommendations too.
Willison_Knives
Posts: 225 Joined: Thu Feb 23, 2017 2:20 pm
Location: St.Catharines On, CANADA
Contact:
Post
by Willison_Knives » Thu Sep 14, 2017 6:24 pm
milkbaby wrote: ↑ Tue Sep 12, 2017 12:57 pm
Did you try contacting Tustech.com or img-electromark.com?
Been a couple of months now so I don't actually remember but the two I contacted via email through their site, never garnered a response.
Dakota J. Willison
Willison Knives
Carter
Posts: 1152 Joined: Wed Jan 25, 2017 2:58 pm
Location: Hendersonville, NC
Has thanked: 2 times
Been thanked: 19 times
Contact:
Post
by Carter » Sat Sep 16, 2017 12:31 pm
Ernie Grospitch does a great job....has good recommendations, can do the artwork, and service is great. Think he charges about $60 and you get a bunch of stencils.
http://www.erniesknives.com/
Willison_Knives
Posts: 225 Joined: Thu Feb 23, 2017 2:20 pm
Location: St.Catharines On, CANADA
Contact:
Post
by Willison_Knives » Sat Sep 16, 2017 7:08 pm
Carter wrote: ↑ Sat Sep 16, 2017 12:31 pm
Ernie Grospitch does a great job....has good recommendations, can do the artwork, and service is great. Think he charges about $60 and you get a bunch of stencils.
http://www.erniesknives.com/
Thanks for the suggestion, I'll give him a shout.
Dakota J. Willison
Willison Knives
nevrknow
Posts: 658 Joined: Thu Apr 06, 2017 1:53 pm
Location: Aiken, SC
Has thanked: 10 times
Been thanked: 11 times
Post
by nevrknow » Sat Sep 16, 2017 8:20 pm
Well hurry up! I have one needing your mark!